Home Page Wire Mesh Machine Wire Mesh Production Line Wire Mesh Products Project Service Agents Wanted Contact Us
 
Reinforcing mesh welding machine>>process of pre-straight
   
 
Introduction of Reinforcing mesh welding line:

Truss girder welding machine/ Lattic girder welding machine

Reinforcing welded mesh machine for the welded farbric mesh reinforcement

Steel bar mesh welding production line

Steel bar mesh welding machine

welding system of the Reinforcing Bar Mesh Welding Machine

Welding system of the Reinforcing Bar Mesh Welding Machine.

Mesh out puller of the reinforcing mesh welding machine

Mesh out puller of the reinforcing mesh welding machine

Mesh puller of reinfrocing mesh welding machine

Mesh puller of reinfrocing mesh welding machine

Line wrie Guider of the reinforcing mesh welding machine

Line wire guider of the reinforcing mesh welding machine

ABE series consist of the shelf for releasing line, warp-rectified mechanism, mesh welding machine, mesh cutting machine and the shelf for mesh falling material. It can weld Ø3 to Ø14 cold-rolled reinforcing steel with rib, steel wire as well as stainless steel wire. It adopts hydraulic pressure transmission. PLC can compile procedure controlling in order to make the distance of the mesh check accurate and operate conveniently. It can adopt once pressurization, once electrify or once pressurization, three times electrify while welding,The disk of warp release the line, warp rectifying, weft increasing material, mesh welding, mesh cutting the falling net for the fixed length. All the actions go on successively and automatically. Many types design can satisfy different requirements. ABE series are machinery, they adopt electrical machinery which can change frequency to control electrode servo, electrical machinery control the pulling mesh. It adopts simens PLC.
 
  Main parameter of Reinforcing mesh welding line:
MODEL NO. ABE-GDH-01 ABE-GDH-02 ABE-GDH-03 ABE-GDH-04
Rated Transformer 150-450KVA
(3 Groups )
200-600KVA
(3 Groups )
300-900KVA
(3 Groups )
400-1200KVA
(3 Groups )
Max. Width 2050 mm 2400 mm 2600 mm 3300 mm
Mesh Opening 50-200 mm 50-300 mm 50-500 mm 50-500 mm
NO. of Electrodes 42 (can be require) 24 (can be require) 26 (can be require) 32 (can be require)
Wire Diameter 3-6 mm 5-12 mm 5-14 mm 5-14 mm
Speed 60-80 line/min 40-50 line/min 30-40 line/min 30-40 line/min
Air pressure ≥0.5 Mpa ≥0.6 Mpa ≥0.7 Mpa ≥0.75 Mpa
Feeding material Wire rod or line wire Wire rod or line wire Wire rod or line wire Wire rod or line wire
Raw material Reinforced steel bar Reinforced steel bar Reinforced steel bar Reinforced steel bar
       
The finished products
Reinforcement welded mesh
Reinforcement welded mesh
Reinforcement welded mesh
Reinforcement welded mesh
Welded steel wire fabric for concrete reinforcement
Welded mesh panel welding machine
     
   
Copyright© 2007-2009 Wuxi Anber Machine Com Ltd. All Rights Reserved.
Tel:0086-510-88239310/88239309; Fax:0086-510-88236613
Email: lixiaoyan@china-anbermachine.com; sales@china-anbermachine.com
Friendly link: Expanded Rib Lath Machine | Wire mesh machine | Expanded Metal Mesh Machine