| |
 |
Introduction of reinforcing mesh welding lines: |
|
| ABE series consist of the shelf for releasing line, warp-rectified mechanism, mesh welding machine, mesh cutting machine and the shelf for mesh falling materials. It can weld Ø2 to Ø12 cold-rolled reinforcing steel with rib, steel wire as well as stainless steel wire. It adopts hydraulic pressure transmission. PLC can compile procedure controlling in order to make the distance of the mesh check accurate and operate conveniently. It can adopt once pressurization, once electrify or once pressurization, three times electrify while welding. The disk of warp release the line, warp rectifying, weft increasing materials, mesh welding, mesh cutting the falling net for the fixed length. All the actions go on successively and automatically. Many types design can satisfy different requirements. ABE series are machinery, they adopt electrical machinery that can change frequency to control electrode servo, electrical machinery control the pulling mesh. It adopts Siemens PLC. |
|
|
| |
|
|
Main parts of reinforcing mesh welding machine: |
|
| |
|
Welding system |
Sheet stacker |
| |
|
|
Main parameter of reinforcing mesh welding lines: |
|
| MODEL NO. |
ABE-GDH-001 |
ABE-GDH-002 |
ABE-GDH-003 |
ABE-GDH-004 |
| Rated transformer |
150-450KVA
(3 GROUPS ) |
200-600KVA
(3 GROUPS ) |
300-900KVA
(3 GROUPS ) |
400-1200KVA
(3 GROUPS ) |
| Max. Width |
2050 MM |
2400 MM |
2600 MM |
3300 MM |
| Mesh opening |
50-200 MM |
50-300 MM |
50-500 MM |
50-500 MM |
| Number of Eletrodes |
42 (CAN BE REQUIRE) |
24 (CAN BE REQUIRE) |
26 (CAN BE REQUIRE) |
32 (CAN BE REQUIRE) |
| Wire diameter |
3-6 MM |
5-12 MM |
5-14 MM |
5-14 MM |
| SPEED |
60-80 line/min |
40-50 line/min |
30-40 line/min |
30-40 line/min |
| Air pressure (Mpa) |
≥0.5 |
≥0.6 |
≥0.7 |
≥0.75 |
| Feeding materials |
Wire rod or line wire |
Wire rod or line wire |
Wire rod or line wire |
Wire rod or line wire |
| RAW MATERIALS |
Reiforced steel bar |
Reiforced steel bar |
Reiforced steel bar |
Reiforced steel bar |
|
| |
|
|
|
|
| |
|
The finished products |
|
|
|
|
Galvanized Reinforcement welded mesh coil |
Stainless steel welded mesh |
PVC coated welded mesh
|
| |
|
|
|
|
