Home Page Wire Mesh Machine Wire Mesh Production Line Wire Mesh Products Project Service Agents Wanted Contact Us
 
Reinforcement mesh production line from pre-straight
   
 
Introduction of Reinforcement mesh production line:
The reinforcing mesh welding line is suitable for the manufacture of engineered mesh. It is equipped with auto line wire feeding system which can improve the production efficiency obviously.
Working Process: the line wire was pre-straightened and cut to length to be driving by servo motor. The cross wire pre-straightened and cut to length are fed to the welding stations one after the other automatically coming down. extremely fast and easy to change and produce all mesh configurations.
Reliable quality: key gear elements and electric components are produced by group of Europe or Asia.
Professional welding transformer: import European technology and Japanese material to produce professionally.
High efficiency of vertical bar feed-in: mechanical and automatic combined, increased the produce efficiency by 20%.
Supercharged welding cylinder: choose the special supercharged cylinder, forced reasonable and balance.
Control system: adopted the European special anti-interference servo motor and controller.
Truss girder welding machine/ Lattic girder welding machine

Reinforcing welded mesh machine for the welded farbric mesh reinforcement

Steel bar mesh welding production line

Steel bar mesh welding machine

welding system of the Reinforcing Bar Mesh Welding Machine

Welding system of the Reinforcing Bar Mesh Welding Machine.

Mesh out puller of the reinforcing mesh welding machine

Mesh out puller of the reinforcing mesh welding machine

Mesh puller of reinfrocing mesh welding machine

Mesh puller of reinfrocing mesh welding machine

Line wrie Guider of the reinforcing mesh welding machine

Line wire guider of the reinforcing mesh welding machine
Construction of the production line:

Line wire feeding table: 1 piece
Line wire step-in system: 1 group(64 sets, or according to customer's requirement)
Line wire overhanging location structure: 1 set
Line wire bracket structure: 1 group
Welding system: 1 set
Cross wire blanking system: 1 set
Product output system: 1 set
Control system: 3 groups or accordingly
Operation system: 1 group
Equipment foundation sill: 1 set
Damageable element: 1 set
Spare parts and tools: 1 set
Main parameter:
Max width of the panel mesh 50" or at customer's requirements
Max length 78" or at customer's requirements
Welding material mild steel wire, low carbon steel wire. Galvanized wire
Mesh size Cross space
 ≥1/2"
Line space ≥1/2"
Diameter of the steel bar
 0.079"-0.315"
Working speed 60-70 lines/min
Feeding way
 Line wire Precut line wire
Cross wire Precut line wire
Number of welder point
 8 points
Circulating water cooling Welding transformer, upper and under welding electrode seat
Power 380V, 50Hz-60Hz or at customer's requirement
Compressed air consumption ≥4.5 m3/min
Air pressure ≥0.75 MPA
Workers needed 5~8 workers/shift
Work pressure of the circulating water cooling ≥0.2 MPA
Occupy area of the equipment about 30󬊃(L譝譎) m
 
   
Copyright© 2007-2009 Wuxi Anber Machine Com Ltd. All Rights Reserved.
Tel:0086-510-88239310/88239309; Fax:0086-510-88236613
Email: lixiaoyan@china-anbermachine.com; sales@china-anbermachine.com
Friendly link: Expanded Rib Lath Machine | Wire mesh machine | Expanded Metal Mesh Machine